If your new HDD or SSD is not showing up and you have them properly installed in to your motherboard follow the steps on this video.This tutorial will also w. Now we know where our drive is, we need to mount it: sudo mount /dev/sda1 /mnt The folder '/mnt' is the standard location for mounting permanent media, but you can always create your own folder if required using the 'mkdir' command. I have a WD EasyStore 5TB external hard drive that's suddenly not mounting. It's formatted as Mac OS Extended (Journaled) and has been working fine up until last night. It does appear in Disk Utility, but will not mount and will not repair using First Aid.
Sometimes, the drive is connected but not mounted. To mount a drive, open Disk Utility and look for the external hard drive in the list. If it is there, click on the Mounting button. Then open a Finder window to see if the drive is mounted or not. External Hard drive not detected. If you plug in your hard drive and it does not appear on the my computer menu, the windows mounting service may be disabled. First, is there a light blinking on the hard drive, most hard drives show a blue or green light when connected to computer if not try different ports or a different caddy as its not.
Updated on April 28, 2020Usually, when you turn on your laptop or a system, the hard drive will be mounted on the OS automatically and so you can access your data on the drive. However, when the Windows or Mac operating system installed on your laptop/PC is not recognizing the drive, then it indicates that there is something problem with your system's hard drive. As a result of this, you cannot access your data stored in te unmountable drive. But, luckily, you can easily recover data from hard drive that won't mount on Windows or Mac with Yodot Hard Drive Recovery software. To know how to, continue reading..!
Hard drive is the most essential part that holds various data on a computer. There are various factors on which the performance of hard drive depends. Any irregularities in hard disk would result in malfunctioning of the drive. Sometimes, the external drive has stopped to mount due to logical errors and thus all its data becomes inaccessible. In this article let us see more about un-mountable hard drive and the suitable remedy to recover files from such drives.
Hard drive is not mounting!!!
Computer hard drive / removable hard drive may stop to mount due to vast reasons. The most common ones are listed here:
- Severe file system corruption
- MBR corruption
- Registry file corruption
- Malware attack
- Malfunctioning of OS
- Software conflicts with dual or multi OS installations and so on
When hard drive fails to mount, it is because of logical errors in drive not due to physical damage. Hence, it will be shown in Disk management utility under control. And to recover data from hard drive that won't mount, one should make use of third party hard drive recovery tool. If the un-mountable drive is not shown even in Disk drives under control panel, then it is physically damaged and nothing good can be done with such hard drives.
Yodot Hard Drive Recovery to Recover Files from Unmountable Hard Drive:
Files from un-mountable hard disk can be efficiently retrieved back with the help of prominent data restoration tool such as Yodot Hard Drive Recovery software. This eminent retrieval program is designed well with ultimate recovery strategies that will recognize all file types from hard drives that won't mount or fails to boot, corrupted and dead hard drives that do not get recognized on Windows OS based computers. Files like documents, folders, Office files, compressed files, program files, database files, etc. can be recovered from internal as well as external hard drives types. Additionally, the tool is capable of retrieving data from hard disk drives formatted with FAT16, FAT32, NTFS, NTFS5, ExFAT and ReFS file systems. This software can be employed to restore files from crashed external hard disk, recover USB pen drives, memory cards, iPods, Fire wire drives and other storage devices on Windows 8, Windows 7, Windows Vista, Windows XP, Windows Server 2008 and 2003 operating systems.
Complete Guidelines to Recover Data from Unmountable Hard Drive:
- Connect the un-mountable hard drive (internal as well as external) to a healthy Windows system
- Download Yodot Hard Drive Recovery on that Windows system
- Install the application and run it through guided instructions
- In the main window, select Partition Recovery option and proceed
- Upcoming window holds all physical and logical drives on the system including externally connected and not mounting hard disk
- Select the drive associated with the not-mounting hard disk from which data has to recovered
- Software scans for partitions present on that drive and provides a list
- Then, select the partition from which files should be recovered and click next
- Further, the software scans for all files and displays in a window
- Go through the recovered files using Data view / File Type view options
- Make your selection for required files, target destination location on system drive and click save
- Do not save the recovered files on to same un-mountable drive after recovery process
Precautions to be taken care of:
- Always assure that you are regularly taking backup of required data on multiple storage devices
- Do not interrupt while transferring files between system drive and removable drive that might make drive unmountable
- Keep track of irregularities in the working of hard drive to avoid severe data disasters
Dec 03, 2020 • Filed to: Answer Hard Drive Problems • Proven solutions
We know that CPU is the brain of a computer. However, not everyone knows that while CPU is the brain to functioning a computer, the hard disk is the body of it. The mind can't be useful without the body, and this is what this article deals with. What if your internal hard disk is not detected? Some of you might simply restart the system, while some would care to reinstall the software. Here, we take a look at the factors that are behind the scene where the hard disk is not detected and how to solve this issue.
Generally, an ATA or SATA port is set to auto-detect. If one finds that their hard disk is not detected by the system BIOS, the following steps (not in any particular order), can be used to isolate the issue.
Part 1. Drive not Enable in the BIOS
To access the BIOS of your system, you should be aware of the settings of your device. Different systems have a different method of accessing the BIOS. Every system displays a brief message about entering the system setup soon after the power has been turned on. System Setup is often called the '˜System BIOS' or '˜CMOS Setup'.
If the hard disk is not detected, it could be because it is turned off in the system setup. There are mother manufacturers that tend to disable the unused ports in the BIOS by default. One has to enter the BIOS to verify their current status.
If a second hard disk is not detected after being connected, it could require to be enabled by turning it ON in the BIOS.
Accessing BIOS in Windows 10:
The latest versions of Windows come with greater processing speed, and therefore pressing a key on boot cannot prove to be helpful. Therefore, you can't enter BIOS; we recommend you follow the given steps to access the BIOS if the hard disk is not detected.
- Start with navigating to the settings. Click on the start menu icon can help you get there.
- You then have to select Update and Security.
- Move to 'Recovery' from the left menu.
- You then have to click on 'Restart' under the advanced startup. This reboots your computer to a special menu.
- Choose Troubleshoot.
- Move to the advanced options.
- Select UEFI Firmware settings and finally click on Restart.
Part 2. Faulty Cables within the Motherboard
There is a chance that the cables within the motherboard have become faulty and therefore your hard disk is not detected. You can start by inspecting the motherboard and hard disk connections for misaligned or bent pins. Please note that the folding, crimping, pinching, or creasing data cables are often responsible for the wires breaking inside the insulation. However, in the same scenario, the exterior of the cable would appear normal. If you are unsure about the condition of your data cable, we recommend that you replace it.
My External Hard Drive Will Not Mount Mac
BIOS will ensure that the hard disk is not detected if the data cable is damaged or the connection is incorrect.
Often, certain ATA cables can fall out of their connection. One can check the condition of their SATA cables and ensure they are tightly connected to the SATA port connection.
If replacing the cable doesn't cause the problem to cease, the issue where the hard disk is not detected lies elsewhere.
The hard disk is not detected as the drive is not spinning up:
This can arise when the drive is not receiving enough power or an insufficient level of power to function and hence doesn't spin up. You can check for this issue by performing the following steps:
- Power Off the computer
- Access the computer case and remove the data cable from the hard drive. This will ensure that any of the power saving commands that are being sent out is ceased.
- Turn back on the system, and check if the hard disk is spinning. One can feel a slight vibration upon touching the hard drive, and if the vibration is not there, the hard disk is not detected or did not start.
If you cannot determine whether the drive is spinning or not while fixing the scenario where the hard disk is not detected, here are a few steps:
Fix Hard Drive That Will Not Mount
- Boot the computer and try to catch some noise.
- Power off the system.
- Disconnect the power cord from the system.
- Remove the power cable when the hard disk is not detected, or the hard disk you are trying to fix.
- Reconnect the power cord to the system itself.
- You then have to boot the system to check if the hard disk sound is audible.
- Reconnecting the hard disk should help you catch some noise.
- Switching power cables with a device like an external CD or DVD to ensure that the cable is not faulty.
- Check the power supply on the computer. This helps you to determine if there is enough electrical power to operate the drives and devices that are being used within the system.
- You then have to connect your drive to a different system.
- Please ensure that you connect the drive in a SATA-USB enclosure if possible, and check if the scenario where the hard disk is not detected is fixed.
Mount Hard Drive Mac
If this doesn't fix the problem, you might have to get in touch with the manufacturer.
Video Tutorial on How to Fix Hard Drive Not Showing Up
Conclusion
The case where the hard disk is not detected is a hardware issue and requires you to have an understanding of BIOS. While using Windows 10, accessibility of BIOS might seem difficult and for that very reason, I have attached the steps that one can follow to reach the BIOS when the hard disk is not detected. Windows 10 has been causing a few troubles for the hard disk owners and therefore, we have listed out a series of methods to get you going.
Your Safe & Reliable Hard Disk Recovery Software
- Recover lost or deleted files, photos, audio, music, emails from any storage device effectively, safely, and completely.
- Supports data recovery from recycle bin, hard drive, memory card, flash drive, digital camera, and camcorders.
- Supports to recover data for sudden deletion, formatting, hard drive corruption, virus attack, system crash under different situations.
What's Wrong with Drive
- Recover Your Drive
- Fix Your Drive
- Format/Wipe Drive
- Know Your Drive